Metering skid — Liquid Hydrocarbon
For gasoline/PMS, diesel/AGO, kerosene, Jet A1 and other light refined products — accurate batch measurement, clean flow conditioning and loading safety.
Product overview · LNS-MS-LH
The LineSig LNS-MS-LH is a skid-mounted tanker loading metering system developed for refined and light liquid hydrocarbon products, designed for controlled and traceable transfer from storage tanks, transfer headers or loading pumps to road tankers, railcars or marine-loading systems.
The skid combines flow conditioning, Coriolis mass measurement, batch control, flow regulation and loading-safety interfaces in a compact package, prioritising clean single-phase flow, controlled batch loading, a safe vehicle interface and reliable transaction data.
Typical products include gasoline/PMS, diesel/AGO, kerosene, Jet A1, naphtha and similar refined hydrocarbons. For Jet A1 service, filtration, cleanliness, water management, sampling and material requirements are reviewed separately per the project specification, and PMS/gasoline applications can interface with a terminal vapour-return or vapour-recovery system.
Design
Technical specification
| Product family | LNS-MS Series — tanker loading metering skids |
|---|---|
| Model | LNS-MS-LH — Refined & light liquid hydrocarbon |
| Metering principle | Coriolis mass flowmeter preferred where applicable |
| Flow range | Project-specific; meter and line size selected from min / normal / max loading rate |
| Line size / design pressure / design temperature | Project-specific |
| Measurement outputs | Mass flow, mass total; volumetric/density/temperature outputs where supported |
| Meter accuracy / repeatability | Vendor/model/project-specific; custody-transfer configuration where required |
| Pressure drop | Calculated for complete skid at minimum/normal/maximum flow and product viscosity |
| Process connection | ASME / EN / project flange standard |
| Piping material | Carbon steel / stainless steel / cryogenic stainless steel / project-specific |
| Skid frame | Structural steel base frame with lifting points; finish per project coating spec |
| Hazardous area | ATEX / IECEx / NEC / local requirement as specified by project |
| Instrument air | Required where pneumatic FCV or actuators are selected |
| Communication | Modbus RTU/TCP, Ethernet, pulse, frequency, analog/digital I/O as selected |
| Control interface | Standalone batch controller, PLC/TAS/SCADA integrated, or hybrid |
Selection note: Coriolis is preferred, not automatically mandatory. Final meter selection accounts for flow range, viscosity, pressure drop, line size, custody requirements, product temperature and two-phase/flash behaviour.
Scope of supply
Where it's used
Ordering information